Used to determine the proper grip length of Cherrymax rivets. Easy to use: just insert the gauge into the prepared hole, draw the gauge back until the hook contacts the backside of the structure, then take your reading directly from the gauge.
- Country of Origin -United States
- ECCN-EAR99
- Color Family-Silver
- Manufacturer P/N-269C3
Rivets are essential fasteners for every aircraft. The CherryMAX offset pulling head features an offset nosepiece to clear any obstructions that are in line with the riveter's normal pulling axis. This CherryMAX pulling head has an offset of 1-15/32 inches. Its overall length of 4-3/8 inches makes the H781-456 compact and convenient for use in restricted areas.
- Country of Origin -United States
- Shipping Weight-0.75 pounds
- ECCN-EAR99
- Manufacturer P/N-H781A-456
- Schedule B Code-8207.90.7570
The CherryMAX® G747 Lightweight Power Riveter has straight, offset and right-angle pulling heads, allowing the tool to be used to install -4, -5 and -6 diameter CherryMAX® bulb type rivets in all head styles, materials and grip lengths. For hard-to-reach installations, an extension is available.
- Air Pressure: 90 PSI (6.2 bar) min./110 PSI (7.6 bar) max.
- Stroke: .437 inch (11.1 mm)
- Pulling Force: 2100 lbs (9.34 kN) @ 90 PSI (6.2 bar)
- Cycle Time: Approximately one second
- Weight: 3.5 lbs (1.59 kg)
- Noise Level: 71 dB (A)
- Vibration: less than 2.5 m/s2
- Air Consumption: .09 SCF/cycle (2.55 L/cycle)
Pulls 1/8" countersunk or universal head Cherrylock rivets. The H681 series pulling heads are used to install 2000 series Cherrylock rivets. A separate pulling head is required for each diameter of rivet. Fits the following riveters: GBP models GBP700 and GBP784, Cherry models G700 and G784
- Country of Origin -United States
- Shipping Weight-1.5 pounds
- ECCN-EAR99
- Manufacturer P/N-H681-4C
- Schedule B Code-8207.90.7570
Pulls 3/16" countersunk or universal head Cherrylock rivets. The H681 series pulling heads are used to install 2000 series Cherrylock rivets. A separate pulling head is required for each diameter of rivet. Fits the following riveters: GBP models GBP700 and GBP784, Cherry models G700 and G784.
- Country of Origin -United States
- ECCN-EAR99
- Manufacturer P/N-H83B-6MB
- Schedule B Code-8207.90.7570
- Ship Dimensions-4 x 1 x 1 inches
- Weight: 4.4 lbs (2,1 kgs)
- Air Pressure: 90 - 100 psi (620 - 690 kPa
- Air Consumption: 3.9 CFM (0,002m3/s) based on 20 fastener installations/minute
- Min. Stroke: .650" (16,5 mm)
- Min. Pull Force @ 90 psi: 2670 lbs (11 877N)
- Noise Level: 85 dbA Maximum at 90 psi
The Cherry® G-29 Hand Riveter is an efficient, compact, lightweight tool for installing Cherry® nut-plate rivets. It comes equipped with a 728A9-3 nosepiece to install 3/32" rivets and has a 728A9-104 nosepiece stored in the handle for installing 1/8" rivets. The G-29 Riveter is 9-1/4" long, weighs just 13 ounces and is intended for use where access or power limitations prevent the use of Cherry power tools.
The Cherry® G-30 Hand Riveter is an efficient, compact, lightweight tool for installing CherryLock® “A" code nut-plate rivets CR2672 & CR2673 series.
Provided with this tool is a specially designed nose piece essential for the proper insertion of the rivet locking collar.
The G30 is 91/4" long, weighs just 13 ounces and is intended for use with limited access or where an air supply is not readily available, preventing the use of Cherry® pneumatic riveters.
This tool will also install the Cherry® CCR264/274 series rivets with a 728A9 series nosepiece.
The CharryMax G800CMR hydraulic hand riveter tool kit includes the G800 Hand Riveter, a straight pulling head, a right angle pulling head, an offset pulling head, an adapter assembly and a measuring and inspection gauge, all housed in a sturdy plastic carrying case.
The CherryMAX G800 is an ergonomic and lightweight tool capable of installing 3/32" through 1/4" single action aerospace fasteners, and has exceptional power multiplication, providing over 5,000 lbs. of pulling force. Despite weighing less than 2 lbs., this hand-powered riveter is a robust tool ideal for use in rugged repair facilities and field repairs.
The Cherry G83A pneumatic-hydraulic lockbolt installation tool is a heavy duty production tool designed for high speed, reliable installation of the most popular sizes of aircraft lockbolts.
This extremely powerful tool has been designed with many ergonomic features: light weight, less recoil, low noise, and a comfortable fit in the operator’s hand. It can be operated in any position with one hand. This tool can also be used to install blind bolts and blind rivets.
The Cherry G-27 Hand Riveter is designed specifically for the most efficient installation of 1/8" CherryMAX Rivets.
This riveter is intended for use where the use of the Cherry pneumatic riveters is not possible because of space constrains or unavailability of an air source.
Overall length of the G-27 is 9 1/4” the net weight is just 13 ounces and the pulling head is an integral part of the tool.
- Country of Origin -United States
- Shipping Weight-1 pounds
- ECCN-EAR99
- Manufacturer P/N-H83B-5MB
- Schedule B Code-8207.90.7570
- Ship Dimensions-4 x 2 x 2 inches
- Over 5000 pounds of power
- Minimum of 3/4" stroke
- Adjustable lever for all hand sizes
- Fluid level indicator
- Cushioned grip