ADHESIVE
EPOXY ADHESIVE
SEALANTS
PAINTS
PRIMERS
HYDRAULIC FLUIDS

PPG® Eco-Prime™ EEAY051 Yellow MIL-PRF-23377 Type I Class C2 Spec Military Epoxy Primer - 10cc Sempen®


PPG Eco-Prime EEAY051 is a high solids, chemical and solvent resistant military epoxy primer. This primer is designed to be applied to aluminium and composite surfaces prior to top coating.

  • Excellent adhesion and corrosion resistance
  • Compatible with Desothane HS topcoats
  • Excellent fluid resistance
  • Compatible with all current spray equipment

 

  • Pack Size-1USG Kit
  • Product Colour-Yellow | Clear
  • Brand-PPG
  • Manufacturer Name-PPG Industries
  • Manufacturer Part Number-SPEEAY051AMPY22K

Sherwin-Williams® CM0483928 Yellow/Green High-Solids Corrosion Resistant Epoxy Primer - 10 cc Burst Pack

 

Boeing provides Sherwin-Williams® CM0483928-10CC, a high performance, high solids, low VOC, two-component, green corrosion inhibitive epoxy primer. This high performance Epoxy primer is intended for use on all types of aircraft and has excellent recoat/intercoat adhesion with Sherwin-Williams topcoat systems.

  • Country of Origin -United States
  • Size-10cc
  • ECCN-EAR99
  • Color Family-Green
  • Manufacturer P/N-CM0483928
  • Schedule B Code-3208.90.0000

GOODRICH 74-451-207 FASTboot Patch Adhesive Primer - 1/2 Pint

This 1/2 pint bottle of Goodrich FASTboot primer activates the PSA adhesive on the bond side of the Goodrich FASTboot pneumatic de-icer. It sticks to aluminum and comes off easily with cold strippers. It works better for abrasion than epoxy primers, zinc chromate enamels and lacquers. It is as hard as aluminum lacquer and polyurethane. 

Simply add the primer to the clean leading edge surface, allow a five-minute dry time, and follow the approved installation procedure for the peel-and-stick Goodrich FASTboot pneumatic de-icer.

Specific Gravity: 0.82 @ 25°C (77°F)
Physical Form: Liquid
MFG Part Number: 74-451-207
Color: Amber
Odor: Solvent
Boiling Point: 76.67°C (170°F)
Flash Point: -20°C (-4°F) (Closed cup)
Flammability Limit - Upper (vol %): 0.11
Flammability Limit - Lower (vol %): 0.01
Vapor Pressure: 68 mmHg @ 20°C (68°F)
Solubility in Water: Negligible
Viscosity: 30 centipoise @ 23°C (73.4°F)
Volatile Organic Compounds (VOC): 771 g/l (Test method Calculated SCAQMD rule 443.1)
VOC Less Water and Exempt Solvents: 771 g/l
Volatility: 0.97

HENTZEN AD9318-FD/AD2298-FD AEROPRIMEâ„¢ Yellow MIL-PRF-23377K Type I Class C2 Spec Low IR High-Solids Epoxy Primer - 1.25 Gallon Kit

Before applying epoxy to your aircraft, treat surfaces with fast-drying Hentzen AD 9318-FD/AD2298-FD Aeroprime Epoxy Primer from SkyGeek. The yellow epoxy primer has a distinctive color so it’s easy to see where it has been applied. It is sold in a two-part, one-gallon kit to keep each individual component in a shelf-stable, inactive state until just prior to use. Before using the primer, mix the components thoroughly, then apply immediately to the surface. The type I, class C2, low IR, high-solids primer goes on smoothly and dries quickly.

  • Country of Origin -United States
  • ECCN-EAR99
  • Color Family-Yellow
  • Manufacturer P/N-AD 9318-FD
  • Schedule B Code-3909.50.6000
  • Color-Yellow

Momentiveâ„¢ SS4004P Silicone Rubber Adhesive Sealant Primer - Pint Bottle

SS4004P primer from Momentive Performance Materials is specially formulated to enhance adhesion for silicone rubber adhesive sealants. Designed primarily for use with metals like aluminum, copper, steel, and stainless steel, as well as porous materials, unglazed ceramics, and wood, SS4004P ensures reliable bonding where traditional adhesion is challenging. Its distinctive bright pink color allows for easy visual confirmation of uniform coating, simplifying application.
  • OEM-Momentive
  • Brand-Momentive
  • OEM Part No.-MOSI01151
  • Colour-
  • ECCN-EAR99
  • Country of Origin-United States
  • Commodity Code-32089099

DOWSILâ„¢ PR-1204 RTV Clear Silicone Sealant Primer - 309 Gram Can

DOWSIL PR-1204 is a clear primer in naphtha solvent for use with all one-part alcohol cure and two-part condensation cure silicone elastomers. It enhances bonding/adhesion of RTV and heat cure silicones to many metals, ceramics, glass and masonry.

  • Color: Colorless to light straw
  • Peel Strength: 40 minimum lbs/in
  • Non-volatile Content: 3-10%
  • Shelf Life: 540 days
  • Country of Origin -United States
  • ECCN-EAR99
  • Color Family-Clear
  • Manufacturer P/N-DOWSIL PR-1204
  • Schedule B Code-3824.90.9290
  • Color-Clear

PLIOBOND® 20 Tan Industrial Adhesive - 1/2 Pint Can

DOWSIL PR-1204 is a clear primer in naphtha solvent for use with all one-part alcohol cure and two-part condensation cure silicone elastomers. It enhances bonding/adhesion of RTV and heat cure silicones to many metals, ceramics, glass and masonry.

  • Color: Colorless to light straw
  • Peel Strength: 40 minimum lbs/in
  • Non-volatile Content: 3-10%
  • Shelf Life: 540 days
  • Country of Origin -United States
  • ECCN-EAR99
  • Color Family-Clear
  • Manufacturer P/N-DOWSIL PR-1204
  • Schedule B Code-3824.90.9290
  • Color-Clear