CA Model 3 Coalescer Cartridge.

PECOFacet CA14-3SB

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA22-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA28-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA33-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA38-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA43-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA56-3

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

PECOFacet CA56-3SB

The PECOFacet 2" Model FG Fuel-Gard monitor cartridges perform three jobs - they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The Model FG Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

Standard Design Features
Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements
Multi-layered media for increased solids holding, water removal and shutdown protection
New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
Structurally withstands a minimum of 174 psi (12 kg/cm²)

(DOWNLOAD BROCHURE)

CAA Model 5 Coalescer Cartridge.

PECOFacet CAA14-5

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA14-5SB

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA16-5SB

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA22-5

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA22-5SB

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA28-5

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)

PECOFacet CAA28-5SB

Built for balanced fluid flow-thru and structural strength, each CAA Model 5 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal shell —all encased in an outer sock material.

Standard Design Features
Tested and qualified to the 5th Edition of EI 1581, Category "C", Type "S"
Multi-layered media for increased solids holding capacity
Ultra-fine solids removal
Maximum water coalescence
Balanced cartridge flow characteristics
Recommended maximum operating temperature: 240°F (115°C)
Withstand in excess of 75 psi (5.25 kg/cm²) differential pressure
pH range from 5 to 9
Choice of self-centering rod or screw base coalescer cartridge mounting styles
Flow direction: inside to out

(DOWNLOAD BROCHURE)